Tips From the Moving Company Pros: Ways To Move a Pinball Maker



With pinball making a huge revival throughout the country, Gentle Giant wishes to make certain that these classic, gorgeous devices remain damage-free while being carried. Oh, and we want individuals moving them to be safe, too.

Initially look, pinball machines can appear daunting to move since of their fragility, weight, and size. Thankfully, our competent Giants have a couple of techniques up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox

The majority of contemporary pinballs (made in the last Twenty Years approximately) have a hinge system which permits the headbox to be folded down. Early pinball machines had their headboxes bolted on, using either 2 or 4 bolts. All Electro-Mechanical pinballs utilize this system, along with the early Solid State devices.

Later on makers have hinges and use a latching system to keep the headbox upright. There might likewise be 2 bolts inside as added safety, in case the latch is broken or inadvertently un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball makers, you require to remove the headbox rear access panel to gain access to the bolts and plugs inside. Normally this panel has a lock on it to keep it in location, however over time the key may have been lost. Quite frequently, there is a screw keeping this panel in location.

As soon as inside, remove the bolts and unplug the large ports that have electrical wiring decreasing into the maker. You may wish to label these ports to put them back in the best area, however they need to be various sizes, making it difficult to plug back incorrectly.

You can now eliminate the headbox totally, or fold the headbox down onto the playfield glass. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in location.
Early Solid State Pinballs

For early Solid State Pinballs, you will have to remove the back glass. There is a lock located on the headbox in among 3 areas: the left-hand side at the top, right-hand side on top or on top of the headbox in the center.

Once unlocked, eliminate the back glass by lifting it up utilizing the lift channel (at the bottom of the glass), and after that pull it out from the bottom.

Open up the back box light panel by lifting the latch located on either the left-hand side or right-hand side. The panel can now swing out towards you, and give you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to lift up the lamp panel in order to swing it open.

Now that you are inside, you can eliminate the bolts, and any plugs that have wires decreasing into the device. You might desire to identify these plugs to put them back in the ideal area. You might not have to remove the plugs, as the wiring should be long enough to allow the headbox to be folded down.

At this point, you can lock up the lamp panel and replace the back glass.
Modern Solid State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Using the supplied secret, turn the lock 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the maker. This is a basic setup and needs no tools.

You're done if you can now fold down the head box onto the cabinet. Make certain you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.

If you can not fold the head box down, then you have to get in. There is a lock situated at the top of the back glass in the center. Utilize the provided secret to unlock, and get rid of the back glass by raising it up from the bottom, then pulling it out from the bottom.

Next, you will require to get rid of the display screen panel. You can do this by raising it up and out. And lastly, open the light panel. There will be a lock situated on either the left-hand or right-hand side. (Some more recent Williams and Bally pinballs do not have read this article a different amp panel, it becomes part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

Remove the two bolts, put the back box back together, and fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in location.
Getting rid of the Legs.

Pinball Maker legs are kept in location by 8 bolts. They will be either 5/8 inch or 9/16 inch heads. The contemporary pinballs have captive nuts or threaded plates inside for the bolts to screw into. These bolts can be eliminated, and the legs will come off.

These threaded plates and captive nuts can be harmed, and the use of extra nuts may have been required. If this is the case, you will have to open the front door of the pinball, slide out the playfield glass, and raise up the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and eliminate the lock down bar. Then slide out the playfield glass, and put in a safe place. Next, raise the playfield by positioning your hand where the ball drains pipes, and raise the playfield up.

You must now have access to any nuts that might have been used. Once any nuts have been removed, change the playfield glass and lock down bar, and lock the front door.

Make certain to mark or keep in mind which legs are for the front and back, as they will be changed differently to suit.
Loading the Pinball.

You are now ready to carry your pinball maker. Prior to you pack it, ensure you remove the pinballs so they don't bounce around during transportation.

If you are moving the pinball utilizing a van or SUV, it might be simpler to remove the legs just prior to filling the maker. Get a buddy to have and assist one of you supporting the pinball, while the other gets rid of the front legs.

Ensure you strap the pinball in, as you do not want it moving if you have to stop suddenly!

For Electro-Mechanical pinball makers, you require to eliminate the headbox rear access panel to gain access to the bolts and plugs within. (Some more recent Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

If you are moving the pinball utilizing a van or SUV, it might be easier to remove the legs simply prior to filling the device. Grab a friend to have and assist one of you supporting the pinball, while the other eliminates the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *